Beltram Pulley Lagging eliminates belts silppage, increases pulley life and improves water sheeding which means increased productivity.
Description:
Black SBR Rubber compound normal quality with good physical properties.
Application:
Pulley lagging for drive pulley, snub pulley, bench pulley and tak up pulley.
Type: Plain, Chevron and diamond groove
Thickness: 10, 12 and 15 mm
Wide: 2,000 mm
Length: 10,000 mm
Paramater | Measurement | PhysicalValues | DINStandard |
Specific gravity | g / cm3 | 1.6 | 53479 |
Shore hardness | Shore A | 60 – 70 | 53505 |
Tensile strength | N / mm2 | 15.0 | 53505 |
Elongation at break | % | 450 | 53504 |
Abrasion | Mm3 | 110 | 53516 |
Unprofiled For tail drums, snub drums and take-up drums as well as for plain drive drum laggings. |
![]() |
Shore | Spec.Weight | Dimension mm |
45 | 1.02 | 1200 x 10.000 |
60 | 1.16 | 1200 x 10.000 |
70 | 1.20 | 1200 x 10.000 |
Dimensions available, thickness: 8, 10, 12 |
With Maxi-Diamond For pulleys larger than 600 mm diameter |
![]() |
Shore | Spec.Weight | Dimension mm |
45 | 1.02 | 1200 x 10.000 |
60 | 1.16 | 1200 x 10.000 |
70 | 1.20 | 1200 x 10.000 |
Dimensions available, thickness: 8, 10, 12 |
With Mini-Diamond For pulley up to 700 mm diameter |
![]() |
Shore | Spec.Weight | Dimension mm |
45 | 1.02 | 1200 x 10.000 |
60 | 1.16 | 1200 x 10.000 |
70 | 1.20 | 1200 x 10.000 |
Dimensions available, thickness: 8, 10, 12 |
Softer rubber materials with high elongation, designed to absorb high deformation pressures caused by the material handled and to repel deposits.