Solvent Cleaner

Solvent Cleaning Fluid


- Cleaning Rubber

- Cleaning Steel

- Buffing Rubber



1. Belt Slicing

2. Belt Repair

3. Pulley Lagging

4. Rubber Linning


Storage as per




Eyes: Flush eyes with large quantities of water. If irritation

remains, seek medical attention.

Skin: Wash with soap and water. Remove severely contaminated

clothing (including shoes) and launder before reusing.

Inhalation: Using proper respiratory protection, immediately remove

affected person from exposure. Administer artificial

respiration if breathing is stopped. Keep at rest. Seek

immediate medical attention.

Oral: If swallowed, do NOT induce vomiting. Keep at rest. Get

prompt medical attention.



Storage: Keep drums well sealed in a well-ventilated area. Store

between 5°C (41°F) and 35°C (95°F) and away from

incompatible materials. Avoid open flames or sparks.

Avoid container over-heating by protecting from sunlight.

Material will accumulate static charges which may cause

electric spark; use proper ground procedures. Do not

pressurize, cut, heat or weld containers. Do not reuse

empty containers without commercial cleaning or


Handling: Where prolonged exposure and use is likely, wear safety

glasses with side shields, long sleeves and chemical

resistant gloves. Where splashing is unlikely but may

occur, wear protective eye wear.



Transport: Non-bulk: ground transport only, ORM-D

UN number: 1866

ADR class: 3.31°C

IMDG class: 3.3°C, page 3375, Ems 3.07, Mfag311

RINA class: 3C.46

IATA class: 3 gr 3°

Packaging Group: III



Form: Liquid

Color: Clear, colorless

Odor: Mild petroleum smell

Flash Point: 40°C (104°F)

Vapor Pressure: 1.73 mmHg at 68°F (estimate)

Specific Gravity: 0.75 (at 60°F)

Water Solubility: <0.01% at 71°F

Vapor Density: 5.03

Boiling Point: 163-176°C (325-349°F)

Freezing Point: -57°C (-71°F)